Strohmy: Created page with "'''2019-01-26 1.2.3''' Fix error causing Windows Touch input to fail with "The parameter is incorrect" Fix serial port settings not correctly restoring in the GUI *Fix star..."

2019-03-16T11:30:32Z

Created page with "'''2019-01-26 1.2.3''' *Fix error causing Windows Touch input to fail with "The parameter is incorrect" *Fix serial port settings not correctly restoring in the GUI *Fix star..."

New page

'''2019-01-26 1.2.3'''

*Fix error causing Windows Touch input to fail with "The parameter is incorrect"
*Fix serial port settings not correctly restoring in the GUI
*Fix start angle calculation for Hokuyo sensors. This was a regression introduced in version 1.2.0 which caused certain models of Hokuyo sensors to be incorrectly rotated.
*Disabled bilateral filter by default. Filter causes problems in certain situations and there is not enough benefit to keep it enabled. This can be re-enabled in the advanced settings.
*Replaced bitmap icons with vector icons. This makes the icons look better on high DPI systems or when the display is scaled up.
*Adjusted UI to make more buttons fit.
*Added new advanced settings window. This contains settings that usually do not need to be changed but can provide benefits in some situations.
*Added new translations to Arabic, French, Portugese, Spanish and Thai.

'''2018-09-19 1.2.2'''

*Fixed LMS500 series missing scan configurations
*Added option to ignore unknown version messages from Sick devices (default)
*Check that the graphics card supports OpenGL 2.0
*Improved handling of invalid license files crashing the software on startup
*Fixed crash on loading older files without Windows Mouse mode setting

'''2018-06-12 1.2.1'''

*Added optional new dongle licensing method
*Added optional test mode license, software will require intervention after 1 to 3 hours
*Added optional license expiry based on system date
*Fixed crashes on network read timeout and some other error cases on Sick and Leuze devices
*Add support for LeiShen N301 series devices
*Allow independent TUIO outputs for multiple devices
*Fixed bug where trying to stop a device during the reconnect interval would not stop it
*Added new dongle licensing system

'''2018-05-23 1.2.0'''

*Added LIDAR OSC output method (experimental, must be activated in the license)
*Added support for Hokuyo lasers with > 180 degree range, defaults to 180 but can be changed in the config file
*Flush Hokuyo input buffers on reconnect to support more reliable connections when the laser is running already
*Fixed crash on Hokuyo laser timeouts
*Fixed shadow filter intialization on Hokuyo sensors
*Added linear regression, defaults to disabled
*Fixed minimum touch age in the debug settings not loading from file correctly
*Fixed crash with Leuze ROD4 sensors
*Fixed crash when stopping a device
*Updated all library dependencies to their newest versions
*Removed Windows XP support, if this is needed it can be readded, contact us
*Changed minimum Mac OS X version to 10.11 (El Capitan)
*Changed minimum Linux version to Ubuntu 16.04 Xenial Xerus or Debian 8 Jessie
*Improved OpenGL rendering performance
*Changed Windows mouse output to just "Mouse", which is available on all supported platforms
*Fixed startup warning about being unable to load "C" translation files
*Changed windows touch default pressure to 0, which means there is no pressure information
*Fixed minimum touch age not loading from file correctly
*Fixed using the server application with Windows display scaling enabled

'''2016-10-28 1.1.2'''

*Fix default port of sensors

'''2016-10-28 1.1.1'''

*Fix code generation problems in release build causing faulty SIMD code being generated. This should fix the new windows mouse mode.
*2016-10-26 1.1.0
*Disable invalid value interpolation by default
*Add configuration for bilateral filter and invalid value interpolation to debug window
*Add support for USB dongles
*Add support for Hokuyo sensors connected by USB
*Add support to automatically detect the specs of Hokuyo sensors
*Fix values below minimum distance (measurement errors) for Hokuyo sensors
*Change recording file format to record the sensors minimum and maximum distance, angular resolution, start angle and data point count
*Added two click windows mouse mode. In two click mode, the first touch point sets the position of the mouse cursor, and the second touch points presses a button. Depending on the side of the first point the second point is on, either the left or the right mouse button is pressed.

'''2016-03-12'''

*Fix device screen association selection reset
*Prevent closing of render window
*Enable output screen selection

'''2016-03-02'''

*Improve default filtering parameters
*Simplify kalman filter configuration
*Fixed pausing of log window
*Fixed log window icon
*Added more tooltips
*Enable n-to-1 filter on Sick LMS1xx
*Enable multi echo filter on Sick LMS5xx
*Improved touch detection
*Fixed small cursor prediction problems
*Add shadow filter for Hokuyo lasers

'''2015-12-21'''

*Add support for Sick LMS50, LMS100 and LMS500 devices
*Fixed loading of device address and port

'''2015-12-11 #1'''

*Show license features under Help|Show license
*Fix crash on exit with running device
*Add log window

'''2015-11-01 #1'''

*Add support for Windows touch injection
*Mark outputs that are not working with a color and a warning message

'''2015-10-29 #1'''

*Add beta support for Leuze RSL400 devices (beta license required)
*Automatically select newly created devices, screens and outputs for editing
*Add support for Windows mouse emulation

'''2015-10-02 #1'''

*Add file selection dialog when no server configuration file is selected (only on Windows)
*Add language selection to the user interface

'''2015-10-01 #1'''
*Fix server not processing touches
*Change touch detection merge algorithm to better handle close points
*Set default value for merge distance to 80mm
*Set default value for max. tracking distance to 400mm
*OpenGL updates do no longer block the user interface, which makes interaction while the sensor is running much more smooth

'''2015-09-30 #1'''

*Add first version of Mac OS X build
*Fix localization problems on Linux

'''2015-09-26 #1'''

*Add first version of Linux build
*Add first version of server component
*Improve license error reporting
*Properly handle UTF8 output on all supported platforms
*Change license file extension from .xml to .otlic
*Only install translation files in non english locales
*Improve file dialogs on Linux, always add file extensions

'''2015-09-19 #1'''

*Improve deployment and localization
*Fix update rate calculation counting state changes as outline updates
*Fix stop state handling
*Remove unused code
*Make Linux build work again
*Add license features

'''2015-09-13 #1'''

*Initial release

Release Notes - Revision history

Strohmy: Created page with "'''2019-01-26 1.2.3''' *Fix error causing Windows Touch input to fail with "The parameter is incorrect" *Fix serial port settings not correctly restoring in the GUI *Fix star..."

Strohmy: Created page with "'''2019-01-26 1.2.3''' Fix error causing Windows Touch input to fail with "The parameter is incorrect" Fix serial port settings not correctly restoring in the GUI *Fix star..."